[Asterisk-Users] TDM400P off-hook detection problem

[Alex Ongena]

On Thu, 2005-10-13 at 12:44 +0200, Sergio Serrano wrote:
> Your card must be a TDM with 4 FXS ports. FXO port is to connect and analog
> line, and FXS port is for connect analog phone.
sorry, my mistake, these are all FXS ports with FXO signaling. I always
mix them up.

>  Are you sure that in 3rd and
> 4th ports you have immediate=no?
my zapate.conf file:
(channel 13 and 14 are ok, 15 and 16 give problems)

[channels]
; Default language
language=be
callerid=asreceived
immediate=no
switchtype=euroisdn

;
; Poort 1-2 gaan naar de PBX
;
context=isdn-pbx
signalling=bri_net
group=2
channel => 1-2,4-5
echocancel = yes

;
; Poort 3-4 gaan naar Publiek net
;
context=isdn-public
signalling = bri_cpe
group=1
channel => 7-8,10-11

;
; TDM40B kanalen
;
signalling=fxo_ks
language=be
context=analog
echocancel=no
channel => 13

signalling=fxo_ks
language=be
context=analog
channel => 14

signalling=fxo_ks
language=be
context=analog
channel => 15

signalling=fxo_ks
language=be
context=analog
channel => 16

Thanks already
alex

> 
> regards,
> 
> srsergio
> 
> -----Mensaje original-----
> De: Alex Ongena [mailto:Alex.Ongena at able.be] 
> Enviado el: jueves, 13 de octubre de 2005 11:17
> Para: Asterisk
> Asunto: [Asterisk-Users] TDM400P off-hook detection problem
> 
> Hi list,
> 
> I have a "Wildcard TDM400P REV I Board 1" with 4 FXO modules and * 1.0.9
> up-and-running.
> 
> Only 2 FXO ports are used for 2 analog phones and are doing fine.
> 
> I now wanted to use the 3rd and 4th port, but when I insert an analog phone,
> take it off hook, I do not get a dial tone. 
> 
> With my 1st and 2nd port, I get messages like:
> 
>     -- Starting simple switch on 'Zap/13-1'
>     -- Hungup 'Zap/13-1'
> 
> on my CLI, but with port 3 and 4, I don't see anything.
> 
> I have tried with the same phone that works well in port
> 1 and 2, so it's not related to the phone.
> 
> The configuration for port 3 and 4 is idential to 1 and 2.
> 
> zap show channel xx does not show anything special and what it show is
> identical between port 1,2 and 3,4.
> 
> It's a production system, so it's not easy to stop and start troubleshooting
> it, certainly not easy to open and swap modules....
> 
> Anybody seen something similar ?
> 
> Thank
> Alex
> 
> --
> NEW: aXs GUARD hands-on Trainings v.7.0 more info at
> http://www.axsguard.com/indextraining.htm
> 
> aXs GUARD has completed security and anti-virus checks on this e-mail
> (http://www.axsguard.com)
> ---------------------------------------------------
> Able NV: ond.nr 0457.938.087
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 
> 
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 12/10/2005
> 
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

--
NEW: aXs GUARD hands-on Trainings v.7.0 
more info at http://www.axsguard.com/indextraining.htm

aXs GUARD has completed security and anti-virus checks on this e-mail
(http://www.axsguard.com)
---------------------------------------------------
Able NV: ond.nr 0457.938.087