[Asterisk-Users] Which asterisk-friendly cards are fax-capable?

[Craig Guy]

I'm trying to figure out what an appropriate deployment model might be. 
Whether to have iaxmodem installed on the hylafax server with a switched 
ethernet connection for iax2 to the * server with the PRI, or to have the 
iaxmodem on the PRI * server and channel the tty comms across the network.

I suspect that the latter might work ok over a WAN so I could have a central 
hylafax server with distributed * servers running iaxmodem at the far end of 
wan links (up to 100ms latency).  The only issue is that I want to retain 
rxfax on the PRI * servers for incoming faxes.

Lee, if I install iaxmodem on a * server for outbound faxing from hylafax, 
can I still use rxfax on the same server to receive faxes?

Craig

----- Original Message ----- 
From: "trixter http://www.0xdecafbad.com" <trixter at 0xdecafbad.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Thursday, October 13, 2005 3:06 PM
Subject: Re: [Asterisk-Users] Which asterisk-friendly cards are fax-capable?


> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users