[Asterisk-Users] X100P callerid ETSI - caller*ID failed checksum

[oner asterisk]

Dear All,

 I am a newbie about asterisk. I have 1x X100P card 3x Sip phone

 I got aware of problem, after I saw the caller id on my sip phone. I
noticed that if I receive a call from GSM Operator A, I can see caller id.
But any other operator, I got no caller id, even my direct PSTN service
operator. So at that moment I was using *1.0.9. than I changed to
asterisk at home 1.3(1.0.9). I got same result. Then I connected an caller id
analog phone to X100P phone port . I could see all CIDs from all operators
(PSTN &GSM)

 I searched CID standards. Our country is using ETSI standards. But I am not
sure about which method we are using ( FSK or DTMF)

 Then trials and patch searches and I find out some but no result, even I
lost CID completely. I setup system again and again. I am using Debian
3.1and as asterisk

1- asterisk 1.0.9 with zaptel 1.0.9

2- asterisk 1.2 beta1 with zaptel 1.2.beta1

3- asterisk 1.2 betal1 with zaptel 1.0.9

4- asterisk 1.0.9 with 1.0.7

5- with CVS

and with all configs my My zaptel.conf is

 loadzone=us

defaultzone=us

fxsks=1

  Zapata.conf ( I played with commented parameters)

 [channels]

signalling=fxs_ks

context=incoming

language=us

immediate=no

usecallerid=yes

callerid=asreceived

 useincomingcalleridonzaptransfer=yes ; I tried with /without / yes /no

usedistinctiveringdetection=no ; our op is not using

;cidsignalling=bell ; I tried bell, v23, dtmf

;cidstart=ring ; As I can see from my analog phone CID is coming after first
ring. I tried ring and polarity

 musiconhold=default

 busydetect=no

;busycount=4

;busypattern=500,500

  ;hidecallerid=no

;callwaiting=yes

;usecallingpres=yes

 ;callwaitingcallerid=yes

;threewaycalling=yes

;transfer=yes

;canpark=yes

cancallforward=yes

;callreturn=yes

;echocancel=yes

relaxdtmf=yes

rxgain=0.0

txgain=0.0

group=1

channel=1

 callgroup=1

pickupgroup=1

  Error message is

-- Starting simple switch on 'Zap/1-1'

-- Asterisk Urgent handler

callerid.c:312 callerid_feed: Caller*ID failed checksum

 and usually with a ":success" at the end. Which make no sense

  Now I am feeling like donkey but wanna solve this issue, So My Questions
are:

1- What parameters I should use for ETSI in Zapata.conf and zaptel.conf

2- How Can I distinguish FSK and DMTF types ? any test method or any
software to be sure ?

3- I see clidtest program but no success to compile it . do you know how ?
4- I tested indication tones also it seems okay do you think is it part of
the problem?

How can I solve callerid issue ????

Thanks

 Cheers,
Oner
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051012/e4540806/attachment.htm