[Asterisk-Users] 2 line SIP ATAs with Asterisk using RealTime

[William Lloyd]

Setup the two ports completely separately.

Each should have it's own entry in realtime with a unique username.

-bill

On 10-Oct-05, at 1:15 PM, Dave Wise wrote:

> I am running CVS Head i686 running Linux on 2005-06-30 22:55:14.  I  
> have SIP Buddies installed using MySQL.
>
> If I try to set up a ATA that has 2 two phone lines (resulting in 2  
> lines on 1 IP address), my second line can never authenticate to  
> dial out.
> I ran ethereal and found that Asterisk is "looking at the IP the  
> request came from" and then, apparently looking up the IP  address  
> in the SIP table and responding to the first match of username to  
> the IP address (this also happens if I plug in one phone to test it  
> and use a designated IP address and then remove that phone and test  
> with a different phone but with the same IP address, it uses the  
> data from the lowest row number that the IP field matches).
>
> Is there any work around to this.  I know that the SIP port is  
> different for line 1 and line 2.  Like I mentioned above, ethereal  
> shows that Asterisk is changing the responses to a different user  
> (or that is what I interpreted it to be doing).
>
> I also tried changing insecure to try to ignore the port number  
> with no success.
> I tried the following values in insecure:
> port
> port, invite
> invite
> yes
>
> I looked on the WIKI and could not find a solution either.  I would  
> appreciate any help.
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>