[Asterisk-Users] Noise using TE410P & Rhino Channel Bank

[Andy Kuo]

I'm not sure where the noise is coming from, but you can change the timing
source in zaptel.conf
 in zaptel.conf:
span=1,0,0,esf,b8zs ------- Asterisk is using external timing source
span=1,1,0,esf,b8zs ---------Asterisk is providing timing to the channel
bank
 AK

 On 10/7/05, Eddie <tradesearch at gmail.com> wrote:
>
> Anyone ever experience noise instead of a dial tone. We are using a Digium
> TE410P and 2 units of Rhino FXO & FXS Channel Bank.
> Everything works well when they are freshly turned on or rebooted, but
> after a while there's only noise can be heard instead of dial tone.
> Does this have anything to do with the timing configuration?
> Where is this time is generated from, is it from the TE410P card?
> How can get rid of this noise? Please advice.
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com<http://easynews.com/>--
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051007/73c2d5c0/attachment.htm