[Asterisk-Users] call to a particular 800 number never shows answered on Zap channel

[Andy Goss]

Whenever we call IBM, the call counter on the phone never starts and in
the CLI the zap channel never gets the answered signal from the PRI.
See below.

    -- Executing Dial("SIP/5933-645d", "Zap/g1/18004267378") in new
stack
    -- Requested transfer capability: 0x00 - SPEECH
    -- Called g1/18004267378

At this point, I am in IBM's menu system.  However the call never
indicates that it is answered either on the phone or in the CLI.  After
60 seconds, the call disconnects.  

    -- Hungup 'Zap/1-1'
  == Spawn extension (main, 18004267378, 1) exited non-zero on
'SIP/5933-7bff'
    -- Executing Hangup("SIP/5933-7bff", "") in new stack
  == Spawn extension (main, h, 1) exited non-zero on 'SIP/5933-7bff'

Does anyone have any ideas?

Thanks,
Andy

--
H. Andy Goss
Network Engineer
Network Advocates Inc.
Main: 502.412.1050
DID: 502.992.5933
Mobile: 502.387.8216
agoss at ntad.com