[Asterisk-Users] Zaptel tone description

[Ricardo Poppi]

Lilantha, the tones are supposed to be switched using the loadzone and 
defaultzone lines in /etc/zaptel.conf , and, progzone in 
/etc/asterisk/zapata.conf.

The information about countries  and frequencies/times  are  at 
zonedata.c located in the sourcecode of zaptel. As you may know, 
changing zonedata.c information requires a re-compilation of the zaptel 
module.

Hope it helps,

Ricardo Poppi.

Date: Wed, 5 Oct 2005 19:02:23 +0800
From: "Lilantha Karunaratne" <lilantha.karunaratne at gmail.com>
Subject: [Asterisk-Users] Zaptel tone description
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
	<asterisk-users at lists.digium.com>
Message-ID:
	<!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA2xL2SF4ybEylW69jV2juZcKAAAAQAAAAJ0Zvf9/YaUil/mIiLkwQPwEAAAAA at gmail.com>
	
Content-Type: text/plain; charset="us-ascii"

Hi,

 

We're trying to use TDM04B with a few analog switches and we've noticed that
it works with the tones from USA only. As it's documented saying that those
tones are hard-coded in the source for analog cards.

 

We'd like to know if there's anyone who could tell us under which file these
settings would be hard-coded as we could like to do some experiments which
will benefit to all Zaptel / Asterisk users in Asian part of the world.

 

Would appreciate an early reply.

 

 

Cheers!

 

 

 

Lilantha Karunaratne MSCS

Tel: (65) 90403497