[Asterisk-Users] Polycom 501: takes calls, but fast busy on dial out?

[Matthew T. O'Connor]

Are you sure there is no firewall on the server?  Or are you sure that 
the Polycom phone is trying to connect to the * server on the expected 
port number?   What happens when you try to telnet to the SIP port on 
the * box?

Matt


Doug wrote:
> Hi,
>
> Has anyone seen this before?  The phones are
> registered OK, and they can take incoming
> calls, but all I get is a fast busy whatever
> I dial.  I've tried regular numbers, *98, etc.
>
> Looking at the Asterisk Command Line Interface, I
> don't see any text outputted when I try to dial out.
> I wonder if it's even getting to the Asterisk server.
> Where does it get the fast busy from--inside the phone?
>
> Another clue is the Flash Operator Panel.  The extensions
> show up, but the "devices" are greyed out.
>
> Here is what "sip show peers" has:
>
> Name/username    Host            Dyn Nat ACL Mask             Port     
> Status
>
> 15102/15102      XXX.XXX.XXX.XXX  D   N      255.255.255.255  1044     
> OK (69 ms)
> 15101/15101      XXX.XXX.XXX.XXX  D   N      255.255.255.255  1043     
> OK (69 ms)
>
> Do the ports matter?
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>