[Asterisk-Users] SPA-3000 generating one-ring calls

[Damon Estep]

I am jumping into this thread late, so forgive me if I missed relevant
info, but the single ring you hear is more than likely the "MWI Splash"
which can be disabled by simply setting the duration of the splash to 0
seconds.



> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Andrew Smith
> Sent: Monday, October 03, 2005 5:08 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] SPA-3000 generating one-ring calls
> 
> Hi Paul,
> 
> Paul Dugas wrote:
> > I'm not using the SPA3k as an extension at the moment; just as an
FXO
> > interface.  The SPA is initiating a SIP call to the Asterisk server
then
> > DELETE'ing it 2 secs later.  Asterisk is ringing other IAX/SIP
> extensions
> > in response.  The FXS interface of the SPA3k *is* setup and
registering
> > with the server but it's never getting called and it doesn't have
> anything
> > connected to it.
> 
> I have this exact problem with mine (2.x firmware), the household was
none
> too
> happy about a phantom 3am "wakeup" call.  I have since disconnected
mine.
> 
> This issue is being tracked on a VoIP forum here in Aus, with a
possible
> fix via
> a firmware update.  I will be trying this later today on mine.
> 
> http://forums.whirlpool.net.au/forum-replies.cfm?t=404957
> 
> Here's the original, quite extensive, thread:
> http://forums.whirlpool.net.au/forum-replies.cfm?t=356546
> 
> Good luck
> Andrew
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users