[Asterisk-Users] asterisk@home isdn

[Francesco Peeters]

On Wed, November 30, 2005 13:54, Alejandro Vargas said:
> 2005/11/30, Francesco Peeters <Francesco at fampeeters.com>:
>> Wrong order: First zaptel, then zaphfc. Do an lsmod to verify both are
>> loaded before ztcfg
>
> Ok, now I will remove all and try. But when I applied Florz patch
> every time I load zaphfc the system hangs.
>
>
> First, when compiling zaphfc (after applying Florz patch) i see some
> warnings:
>
> *** Warning: "zt_register"
> [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined!
> *** Warning: "zt_receive"
> [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined!
> *** Warning: "zt_transmit"
> [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined!
> *** Warning: "zt_ec_chunk"
> [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined!
> *** Warning: "zt_unregister"
> [/usr/src/bristuff-0.3.0-PRE-1/zaphfc/zaphfc.ko] undefined!
>
> Ok, then... modprobe zaptel and...
> [root at asterisk1 zaphfc]# insmod ./zaphfc.ko debug=3
>
> (and the system hangs) Kernel panic, fatal exception. Is it necesary
> the Florz patch?

Unless you are using a genuine Junghanns card, yes...
It removes the hardware check they put in to make it only work with
Junghanns hardware...
(A somewhat futile and time-wasting exercise when dealing with Open Source
IMHO)

These are weird warnings...
Have you done make clean before make?
Have you first compiled the patched zaptel?

-- 
Francesco Peeters
----
GPG Key = AA69 E7C6 1D8A F148 160C  D5C4 9943 6E38 D5E3 7704
If your program doesn't recognize my signature, please visit
http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate.