[Asterisk-Users] delayed pickup in ZAP interface and issue withhang up-s (fwd)

[brett at websmyths.com]

Pretty sure....

zapata.conf

immediate=yes

should do it for incomming calls and you won't have CID.

Brett

On 11/29/2005, "bogi at tsm32.com" <bogi at tsm32.com> wrote:

>Hi out there, 
>
>I’m looking for support in regards to configuration of ZAP interface on a 
>TDM400P card (TDM04D).I’m running Asterisk v 1.0.7 cvs on White Box 3.5 with 
>kernael 2.4.21
>I’ve got two problems with Asterisk:
>1. When there is an incoming phone call on the zap interface, Asterisk holds 
>call for about three rings and then forward it to a predefined extension. I 
>assuming that it waits for caller id, therefore I’ve tried to switch it off 
>by modification of callerid and usecallerid with no positive outcome. 
>
>My zapata.conf is:
>[channels]
>language=en
>immediate=no
>busydetect=yes ; to test when a line is hung-up
>busycount=6 ; to prevent suprious hangups
>context=from-pstn
>signalling=fxs_ks
>usecallerid=no
>callerid= asreceived    ;(no or any other value doesn’t bring any >improvement to my setup)
>echocancel=yes
>echotraining=800
>callprogress=yes
>group=0
>channel=>1-4