[Asterisk-Users] wcfxo loads correclty after issuing twice the command "ztcfg -vvvv" !!

[Dulmandakh Sukhbaatar]

Bukoka Budoka wrote:

> Hi to all,
>
> when i issue the ztcfg command for the first time i get the message 
> "Changing signalling on channel 1 from Unused to FXS Kewlstart".
>
> When i issue it for the second time i get the normal message "1 
> channels configured."
>
> Has anyone any ideas of why not to have the normal behavior on the 
> first place (i mean without passing from "Unused to FXS Kewlstart" and 
> then to "1 channels configured." ???
>
> -------------------------------------------------------
>
> [root at asterisk ~]# ztcfg -vvv
>
> Zaptel Configuration
> ======================
>
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>
> 1 channels configured.
>
> Changing signalling on channel 1 from Unused to FXS Kewlstart
>
>
> [root at asterisk ~]# ztcfg -vvv
>
> Zaptel Configuration
> ======================
>
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>
> 1 channels configured.
>
> My Zaptel is as follows:
>
> fxsks=1
> loadzone=us
> defaultzone=us
> --------------------------------------------------
>
> My zapata is as follows:
>
> [channels]
> context=outgoing
> ;switchtype=national
> signalling=fxs_ks
> ;rxwink=300              ; Atlas seems to use long (250ms) winks
> ;flash=10000
> usecallerid=no
> hidecallerid=yes
> callwaiting=no
> usecallingpres=no
> callwaitingcallerid=no
> threewaycalling=no
> transfer=no
> cancallforward=no
> callreturn=no
> echocancel=yes
> echotraining=yes
> echocancelwhenbridged=yes
> rxgain=3.0
> txgain=-1.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=yes
> cidsignalling=bell
> channel => 1
>
>
> The zaptel driver as well as the wcfxo driver is loaded in rc.local:
>
> modprobe zaptel
> modprobe wcfxo
> /sbin/ztcfg -vvvvv
> /usr/sbin/asterisk -vvv &> /var/log/asterisk/status-log &
>
> thank you all,
>
> Budoka.
>
> _________________________________________________________________
> Don't just search. Find. Check out the new MSN Search! 
> http://search.msn.com/
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

If you run ztcfg first time after a new configuration, it will show 
first screen, specially when you change signalling configs. Afterward 
ztcfg will show second, until you make change. :D