[Asterisk-Users] Reboot stops TD400P cards from outgoing calls until first incoming call arrives

[James B. MacLean]

Rich Adamson wrote:

>------------------------
>  From: "James B. MacLean" <macleajb at ednet.ns.ca>
>
>Asterisk*CLI> zap show status
>Description                              Alarms     IRQ        
>bpviol     CRC4
>Wildcard TDM400P REV E/F Board 1         OK         0          0          0
>Wildcard TDM400P REV I Board 2           OK         0          0          0
>
>---------------End of Original Message-----------------
>
>The above does indicate a problem.  The Rev E/F card is known to have
>issues, and most of the issues revolved around unusual failures after
>a week or so. But there have been several other changes leading up to
>the Rev I card (the latest is Rev J with only minor changes since Rev I).
>
>I don't know of anyone that has attempted to mix to Rev's of the TDM
>card in a system, so unknown whether that might be an issue or not.
>
>I'd contact digium support and have that Rev E/F card rma'ed under
>warranty. (All TDM cards are still under warranty.)
>  
>
Thanks for the heads up. More dissappointing is that the E/F card is the 
newer card purchased. Where can I go to see when certain revisions were 
released? Surprising that the newer card just purchased (to me) is the 
older rev :(.

Next I'll try with just one card, but that will be another day as the 
machine is not local.

thanks again,
JES
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3684 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20051127/135577e5/smime.bin