[Asterisk-Users] Dialplan help

[MZ]

Yeah, and unlocked ATAs are not available in the market here.
I even had to pay almost twice the cost of my X101p clone for shipping

On 11/28/05, Steve Totaro <stotaro at totarotechnologies.com> wrote:
>
> Wow, what a pain.  I would just pickup an FXS and be done with it.
>
> >
> >
> > Thanks Steve,
> >
> > But this will not work for me because after "yourcodehere" the line
> will
> > give a confirmation tone (similar to a congestion tone only faster)
> then
> > after flashing or certain period will turn into a busytone and to get
> the
> > dialtone again i need to Flash again before i can dial ${EXTEN}.
> >
> >
> >
> > On 11/28/05, Steve Totaro <stotaro at totarotechnologies.com> wrote:
> >
> >       How about this?
> >
> >       exten => 1234567890,1,Dial(Zap/g1/yourcodehere${EXTEN})
> >       -or-
> >       exten => 1234567890,1,Dial(Zap/g1/yourcodeherewwww${EXTEN})
> >
> >       I have not seen restrictions set before dialing since local
> numbers
> >       would not fall under the restriction but that is what you said.
> > Usually
> >       you dial the number first and if it is a long distance call,
> they
> > prompt
> >       for a code with a tone or something.  The second example shoud
> give
> > you
> >       a two second pause before dialing the rest of the number (wwww).
> >
> >       Thanks,
> >       Steve
> >
> >
> >       >
> >       > thanks steve,
> >       >
> >       > the reason i cannot remove the restriction on the telco line
> is
> > that
> >       an
> >       > analog fone is connected to the phone jack of the x101p and
> some
> >       visitors
> >       > occasionally use the fone and they're supposed to only call
> local
> > toll
> >       > free numbers.
> >       >
> >       > Your suggestion of doing the restrictions within asterisk is
> good
> > but
> >       i
> >       > have yet to buy an FXS port for the analog fone so i cannot do
> so.
> >       >
> >       > and for the extensions connected via softphones to asterisk, i
> > wanted
> >       > asterisk to take care of opening the lock before dialing the
> > desired
> >       phone
> >       > number.
> >       >
> >       > i was thinking of using the "SendDTMF" but i dont know how to
> get
> > the
> >       zap
> >       > line go off hook.
> >       >
> >       >
> >       > On 11/27/05, Steve Totaro < stotaro at totarotechnologies.com
> > <mailto:stotaro at totarotechnologies.com>
> >       > <mailto:stotaro at totarotechnologies.com> > wrote:
> >       >
> >       >       >
> >       >       > hi,
> >       >       >
> >       >       > can anyone please guide me as to how i can implement
> this
> > in
> >       >       > extensions.conf:
> >       >       >
> >       >       > my PSTN line normally has its longdistance capability
> > "locked"
> >       > which
> >       >       can
> >       >       > be opened by dialing some keys and the PIN.
> >       >       >
> >       >       > if i wanted some users to be allowed to call long
> distance
> >       using
> >       > the
> >       >       zap
> >       >       > channel, how can i initially offhook then send some
> DTMF
> > then
> >       > Flash
> >       >       twice
> >       >       > before proceeding with the dialing EXTEN.
> >       >
> >       >
> >       >       Do you want asterisk to take care of the DTMF for you?
> When
> > you
> >       say
> >       >       users, do you mean certain extensions?
> >       >
> >       >       Why not cancel your restrictions with the telco and
> > implement
> >       >       restrictions within asterisk.  You can use authenticate
> > before
> >       your
> >       > dial
> >       >       statement to prompt for a pin when dialing long distance
> or
> > you
> >       can
> >       >       create different contexts for phones that you want to
> access
> >       long
> >       >       distance and for phones that you don't
> >       >
> >       >       Thanks,
> >       >       Steve
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051127/f28c403b/attachment.htm