[Asterisk-Users] Reboot stops TD400P cards from outgoing calls
until first incoming call arrives
Rich Adamson
radamson at routers.com
Sun Nov 27 09:24:35 MST 2005
There are no resets required. You apparently have something misconfigured
in either zapata.conf or extensions.conf, but without seeing these it is
difficult to guess at what you've done.
Best guess is that zapata.conf is messed up, and likely associated with
the group (g2) definitions.
------------------------
From: "James B. MacLean" <macleajb at ednet.ns.ca>
My TD400P cards will not dial out until someone dials in first. Error is :
-- Executing Dial("SIP/8438-3e69", "Zap/g2/94248438|25|t") in new stack
Nov 27 11:57:12 NOTICE[5599]: app_dial.c:1011 dial_exec_full: Unable to
create channel of type 'Zap' (cause 34 - Circuit/channel congestion)
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing Hangup("SIP/8438-3e69", "") in new stack
Using latest CVS's. Any reset I can do on rebooting the system to set
these channels up properly?
More information about the asterisk-users
mailing list