[Asterisk-Users] Problem about outgoing calls with verizon.

[Zheng Fang]

It works. For all the verizon lines, I add w before the dialstring in
Asterisk at home setup. It now works fine.

Thanks a lot.




On 11/26/05, Steve Totaro <stotaro at totarotechnologies.com> wrote:
>
> Add a w (wait) to your dialstring.  Chances are asterisk is dialing
> before you are getting dialtone.  You can put a butt set on the line and
> listen while dialing out to verify this before adding the w.  Sometimes
> it may take ww to get it working correctly.
>
>
>
> Thanks,
>
> Steve
>
>
>
> _____
>
> From: Zheng Fang [mailto:fangzheng1980 at gmail.com]
> Sent: Friday, November 25, 2005 9:45 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] Problem about outgoing calls with verizon.
>
>
>
> Hi, everyone,
>
>
>
> I have met a very strange problem. We use a Asterisk PBX connected with
> two rollover PSTN phone line provided by Verizon by Digium TDM cards.
> The incoming calls are always OK. But when I make outgoing calls,
> sometimes it works, sometimes it just get a busy tone, doesn't work at
> all. The strange thing is that when I use the same server with SBC lines
> perviously, it worked fine.
>
>
>
> What is the problem here? This drives me crazy.
>
>
>
> Thanks
>
>
>
> /frank
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051127/0e00fd7d/attachment.htm