[Asterisk-Users] configure intel modems.....

[Phil Pritchard]

thanks Mark,
     your right i have been getting confused between office and 
station(given myself an uppercut and a slap to the back of the head),
thats sort of what im after, but does not really give any quick fix or 
details for config files for making asterisk use this card.
     i am a new player to asterisk and have it connected to fwd and a 
few soft phones.
because i am tight( well, just dont have the money ) i have to try one 
of these cheap cards to connect to a panasonic phone system.
i have one of these modems and thought i would give it a go. there is 
plenty of info about for connecting to Digium cards
but have not seen/found anything useful, re: the intel voice modems.

    i can surface mount solder but without knowing what components are 
what i dont want to remove anything,
there are no markings on the board for the components, well not enough 
anyway.( eg. R13 and R19)
so that sort of stumps that!

    originally i had 2 cards in there but the second card did funny 
things to the server... ie.
- soft phones would half login, i can make calls but cannot receive. the 
logs for the soft phone said something about
sip protocol error, although the voice quality was fine and both ways.
- there was no music on hold at all.

i have removed the second card and server back to normal, only still no 
pots line.

i have tried to config modem on what i have found on the net but its 
still not working, the modem is there and working.
lsmod says the module(zapa..) is loaded but not used.

the machine is an old dell power edge, without usb....  i read some 
thing about asterisk needing the usb for something internal
is this true,
 will i have to change the hardware or add a usb card.......

thanks again Mark



Phil



Mark Edwards wrote:

>Phil.
>
>You won't have much luck achieving this. The closest you will be able to
>get is to set the intel voice modem up as an FXO port. Was this what you
>meant?
>If so, take a look on the voip-info.org site as there is a page there
>that will point you in the right direction. 
>
>http://www.voip-info.org/wiki/view/X100P+clone
>
>regards,
>
>Mark.
>
>
>-----Original Message-----
>From: Phil Pritchard [mailto:phil at pritchard.asn.au] 
>Sent: Saturday, 26 November 2005 5:11 PM
>To: Asterisk-Users at lists.digium.com
>Subject: [Asterisk-Users] configure intel modems.....
>
>can somebody help or point in the right direction.
> where i might be able to find info re: setting up intel voice modems as
>
>fxs ports..
>
>thanks in advance.....
>
>
>Phil
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>