[Asterisk-Users] QSig and MD110

[Tim Rayner]

Hi Roger,

There are quite a number of areas that could stop this working on the 
MD110 PBX side.  I'll show you how mine are configured - you may like to 
try some of my paratemeters.  My MD110 is running BC9 software - should 
consult your Ericsson manual to understand the roles of each of these 
paramters.  Keep in mind that I'm not talking directly from our MD110 to 
Asterisk - rather the MD110 is using a QSIG link to talk to a cisco 3745 
voip gateway - which in turn has dial peers configured to talk to our 
Asterisk box.

I hope helps.

Tim.

<.rocap:rou=45;
ROUTE CATEGORY DATA

ROU SEL          TRM SERV       NODG DIST DISL TRAF     SIG          BCAP

45  111000000000 3   3110000000  0   30   128  00151515 111110000031 101100

END

<.roddp:dest=3;
EXTERNAL DESTINATION ROUTE DATA

DEST  DRN ROU CHO CUST ADC                TRC SRT NUMACK PRE

3         45           150510000000025000 0   1   0

END

<.excap:dir=19111;
EXTENSION CATEGORY FIELDS

DIR       TRAF      SERV      CDIV       ROC       TRM       ADC

19111     03030315  02001201  001131000  0000      0         000010301

END


Rogerio Ferreira da Cunha wrote:

>Tim,
>
>It's working. But I'm not getting the callerid from the MD's callers.
>Do you have any idea?
>
>Tks 4 your help.
>
>2005/11/24, Tim Rayner <Tim.Rayner at csu.edu.au>:
>  
>
>>Hi Roger,
>>
>>We've solved this with the MD110 sending calls to cisco VoIP gateways.
>>The method is to set the Minimum and Maximum call length for this number
>>range on the MD110 - and to configure the destination route to only send
>>the call when the minimum length is reached (sometimes called en-block
>>sending).  If your asterisk number range is 1500 - 1599
>>
>>define your minimum and maximum length.
>>
>>NANLS:EXL=15,MIN=4,MAX=4;
>>
>>Also - make sure that your Route definition for this destination does
>>the enblock.
>>
>>RODDI:DEST=15,ROU=45,ADC=1xxxxxxxxxxxxx;
>>
>>The first parameter of ADC causes the call to wait for minimum length
>>before sending it to the route - the other parameters should stay at
>>their pervious values.
>>
>>I hope this helps - its worked well for us.
>>    
>>


-- 
======================================================================
Tim Rayner - Networks Team Leader |Email: trayner at csu.edu.au
         Charles Sturt University |Mail: P.O. Box 789,Albury,NSW,2640
         Phone : (02) 6051 9886   |Fax: (02) 6051 9919
======================================================================
"There are only 10 types of people - those who understand binary
 and those who don't"
======================================================================