[Asterisk-Users] Sangoma problems!?

[Stig Even Larsen]

I'm having problems connecting my Sangoma cards to our PRI (E1) 
interface. It seems that the card get connected (green led), but 
Asterisk reports:
Status: Provisioned, Down, Active.

When I install another Sangoma card on the same system (pri_net), and 
connect the two cards with a PRI cross-over cable both cards get 
connected (green led) and Asterisk reports both spans:
Status: Provisioned, UP, Active

What could be wrong?
I'm I missing something?


zaptel.conf
;Telco PRI
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

;PBX
span=2,0,0,ccs,hdb3,crc4,yellow
bchan=32-46,48-62
dchan=47


zapata.conf (minimal)
[channels]

context = from-pstn
switchtype = euroisdn
group=0
signalling = pri_cpe
channel => 1-15
channel => 17-31

context = alcatel
switchtype = euroisdn
group=1
signalling = pri_net
channel => 32-46
channel => 48-62

Best regards,
Stig Even Larsen