[Asterisk-Users] Multiple HFC-PCI cards in mixed modes (TE+NT) won't work!...

[Francesco Peeters]

On Thu, November 24, 2005 20:09, Francesco Peeters said:
> On Wed, November 23, 2005 20:29, Francesco Peeters said:
<SNIP>
>
> Just made myself a crossed NT1 connection to the NT mode card (as
> described on the PBX4linux site) and connected my phone.
>
> The zaphfc driver shows that layer 1 is activated (G3) once the phone is
> connected, but that is where it stops, as anything above that should be
> handled in chan_zap.
>
> However when I leave the card in bri_cpe_ptmp in zapata.conf, the layer2+
> protocols are not correct (TE mode) and when I put in bri_net_ptmp, the
> chan_zap somehow doesn't complete loading or exits in an unexpected
> manner, resulting in a situation where Asterisk stops loading it's
> configs, and thus runs without a dialplan and other modules...
>
> Seems to me there's an issue in that area: chan_zap, maybe libpri, etc.
>

I keep replying to myself...  ;-)

Some extra info:
/proc/zaptel/*:
Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" AMI/CCS

           1 ZTHFC1/0/1 Clear (In use)
           2 ZTHFC1/0/2 Clear (In use)
           3 ZTHFC1/0/3 HDLCFCS (In use)
Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [NT] layer 1 ACTIVATED (G3)" AMI/CCS

           4 ZTHFC2/0/1 Clear (In use)
           5 ZTHFC2/0/2 Clear (In use)
           6 ZTHFC2/0/3 HDLCFCS (In use)

/proc/pci:
  Bus  0, device   7, function  2:
    USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
      IRQ 11.
      Master Capable.  Latency=32.
      I/O at 0xc000 [0xc01f].
  Bus  0, device   9, function  0:
    Network controller: Cologne Chip Designs GmbH ISDN network controller
[HFC-P
CI] (rev 2).
      IRQ 11.
      Master Capable.  Latency=16.  Max Lat=16.
      I/O at 0xc400 [0xc407].
      Non-prefetchable 32 bit memory at 0xe3001000 [0xe30010ff].
  Bus  0, device  17, function  0:
    Network controller: Cologne Chip Designs GmbH ISDN network controller
[HFC-P
CI] (#2) (rev 2).
      IRQ 11.
      Master Capable.  Latency=16.  Max Lat=16.
      I/O at 0xcc00 [0xcc07].
      Non-prefetchable 32 bit memory at 0xe3002000 [0xe30020ff].

I have tried all I can to assign different IRQ's to the HFC-PCI cards, but
they *always* take IRQ 11  :-(

-- 
Francesco Peeters
----
GPG Key = AA69 E7C6 1D8A F148 160C  D5C4 9943 6E38 D5E3 7704
If your program doesn't recognize my signature, please visit
http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate.