[Asterisk-Users] Help need to reset Adit 600 for Asterisk install

[Steve Totaro]

Is the password limited to four digits like the Adtran 600 (I think)?

Start plugging in numbers.  Only 10,000 possible combinations.



> -----Original Message-----
> From: jim at addaweb.net [mailto:jim at addaweb.net]
> Sent: Wednesday, November 23, 2005 9:59 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Help need to reset Adit 600 for Asterisk
> install
> 
> Thanks Jerry,
> 
> I have called Carrier Access and they can reset the password but for a
> considerable fee.   We have serial access but after it boots it
> immediately
> asks for a username and password.  We have the username but the
password
> is
> not what it is suppose to be.   There's a reset switch on the
faceplate
> but
> I think the LOCAL SET is OFF and that is why it doesn't respond.
Their
> manual says the Reset switch is not under the control of LOCAL SET,
yet it
> doesn't seem to work.  Well, we might not know the proper boot
sequence.
> It
> contains flash memory and there is a timing that important to that
reset
> procedure.  Anyone's help is much appreciated.
> 
> --Jim
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jerry
Jones
> Sent: Wednesday, November 23, 2005 7:40 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Help need to reset Adit 600 for Asterisk
> install
> 
> Not sure but are you connecting via serial or ehternet? Seems to be
the
> serial had a way to do this easily on bootup. Otherwise I would be
> interested for future reference. Carrier Access does have a good
support
> team, just need to know your serial number.
> 
> On Nov 23, 2005, at 12:13 AM, <jim at addaweb.net> <jim at addaweb.net>
wrote:
> 
> > Looking for a way to hard reset a ADIT 600 just purchased used.
> > But it
> > seems to have a master password already set.  We've tried the front
> > reset but maybe we don't have the right sequence of boot order.  Any
> > help would be much appreciated?  - Jim
> >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation sponsored by Easynews.com --
> >
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users