[Asterisk-Users] TDM400 FXO port 1 only problem.

[Tom Vile]

The problem is not the module though its on the port its plugged into.
 I can move the module to another port and it works fine, so I was
thinking it is the board.  I guess I will call Digium and see what
they say.

thanks

On 11/22/05, Rich Adamson <radamson at routers.com> wrote:
>
> > I have a TDM400 REV I Ver 1 board and am having an issue with 1 of the
> > 4 FXO channels.  FXO 1 always has clicks, pops and echo but the others
> > are crystal clear all of the time.  The card is on its own IRQ zztest
> > shows 100% to 99.98%  and is getting 1000 int per second.  Its not
> > dropping interrupts either.
> >
> > I ran FXOTUNE and it did nothing to fix the issue
> >
> > It only is happening on FXO port 1
> >
> > Anything else to try?
>
> Sure... call digium support. They'll probably rma the module.
>
>
>


--
Tom Vile
Baldwin Technology Solutions, Inc
Consulting - Web Design - VoIP Telephony
www.baldwintechsolutions.com
Phone: 518-631-2855 x205
Phone: 978-203-3848 x205
Fax:     518-631-2856