[Asterisk-Users] Aastra 9133i registration errors

[Chris Coulthurst]

I think the 9133 is like the 480i, in which you have multiple 'line' keys. 
I think its trying to register line 2 as well as 1, and you may not have 
anything set for line 2.  If you make 2 the same as 1, incoming calls while 
you are on line one will roll-over to the line 2 key.  If you don't want 
line 2, I'd remove any references to it in your MACADDRESS.cfg files.

Chris Coulthurst
chris at shuksan.com
----- Original Message ----- 
From: "Dave Cotton" <dcotton at linuxautrement.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Saturday, November 19, 2005 4:57 AM
Subject: Re: [Asterisk-Users] Aastra 9133i registration errors


> On Wed, 2005-11-16 at 20:17 +0000, Chris Bagnall wrote:
>> Hi all,
>>
>> I have a pair of new Aastra 9133i phones here that I'm testing for
>> receptionist duty at a couple of places next week and they don't seem to 
>> be
>> registering with * correctly.
>>
>> I've set the phone up with the following entries in the appropriate tftp
>> config file:
>> sip line1 auth name: 205
>> sip line1 password:
>> sip line1 user name: 205
>> sip line1 display name: 205
>> sip line1 screen name: "Chris"
>> sip proxy ip: sip.minotaur.cc
>> sip proxy port: 5060
>> sip registrar ip: sip.minotaur.cc
>> sip registrar port: 5060
>
>
>> The error I'm getting in asterisk's console log is:
>> NOTICE[8801]: chan_sip.c:9835 handle_request_register: Registration from 
>> 'No
>> User <sip:No%20User at sip.minotaur.cc:5060>' failed for '10.10.1.251' - 
>> Wrong
>> password
>>
>> However, the phone seems to be able to make and receive calls without any
>> difficulty, and the phone appears correctly on a "sip show peers". It 
>> seems
>> to be purely cosmetic, but I'd love to know why the error's there.
>>
>> My first thought was that I probably don't need both sip proxy and sip
>> registrar configured in the tftp config file, but I don't fully 
>> understand
>> the difference between them in Aastra-speak (or which one * should be
>> under).
>>
>
> With my 9112i I only have registrar entries and have no such messages.
>
> But if I set qualify it returns unreachable so I just have qualify=no
>
>
> -- 
> Dave Cotton <dcotton at linuxautrement.com>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>