[Asterisk-Users] Problem switching from external ISDN-2 to PBX ISDN-2

[amer karim]

Hi;
 What is ur extension.conf?
do u use overlapdial??

 2005/11/18, Lars Dybdahl <ldybdahl at gmail.com>:
>
> I have a system that works perfectly using zaphfc on an external
> ISDN-2 connection. When I move this to a PBX-based ISDN-2 connection,
> it still receives calls, but is unable to dial out.
>
> In Denmark, we have no long distance calls, but only national calls
> (8-digit numbers) or international calls (00 <countrycode> etc.).
> Normally, incoming national calls would be reported as 8-digit
> numbers, but when I connect my asterisk to the PBX, it is preceded by
> three zeroes (00012345678 instead of 12345678). This seems to indicate
> a problem, too, since you normally only dial one zero on a PBX to get
> an outside line.
>
> Any ideas?
>
> Lars.
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com <http://Easynews.com>--
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>



--
cordialement
Karim AMER
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051118/1fb4e71b/attachment.htm