[Asterisk-Users] zapata.conf for T1 PRI

[Jerry Jones]

 From my config on a 4 port card...

;PRI on channel 1 of DS3 #2
group=1
callgroup=1
pickupgroup=1
channel => 1-23
;
;PRI on channel 3 of DS3 #2
group=2
echocancel=no
callgroup=2
pickupgroup=2
channel => 25-47


Use Dial(zap/g1/xxxxxxxxxx) or Dial(zap/g2/xxxxxxxxxx) to pick a PRI

good Luck



On Nov 16, 2005, at 10:38 AM, Trey Blancher wrote:

> I have the TE210p card, with two distinct PRI lines connected to each
> of the spans.  For each span, there are 23 B channels, numbered 1-23,
> and one D channel, numbered 24.  One set of 23 channels is already set
> up, in group 1 (channels => 1-23 in zapata.conf).  How do set up a
> different group with the new channels?  I don't see any way of
> specifying the spans, or am I supposed to set the new channels up as
> 25-48, even though my upline provider tells me to set them up as 1-24
> (B & D chans)?
>
> --
> Trey Blancher
> Systems Administrator, USA Debt Management LLC
> (251)445-0683 ext 8601
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users