[Asterisk-Users] Anyone got zaphfc running 2 cards with NT and TE simultaneously?

[Francesco Peeters]

As I have not seen my post show up in my mail-client, I am resending it to
be sure it arrives on the list. My apologies if it is a double-post!...

----------------------------------------

I am trying to set up the following:

Asterisk Server (1.0.9-stable) with BriStuff (0.2.0.RC8j) and florz patch
2 HFC cards (cologne chip)

I want to connect 1 to the ISDN net (TE) and to the other connect the old
Siemens Gigaset 4135 (NT mode)

I have tried loading zaphfc.0 with modes=1, modes=2 and modes=3
I have tried changing zapata.conf with different combinations of
bri_cpe_ptmp and bri_net_ptmp

It makes no apparent difference whether I insmod zaphfc.o with modes=1/2/3

It does make a difference whether I use signalling=bri_cpe_ptmp or
signalling=bri_net_ptmp.

When both groups are set for cpe, asterisk recognizes the cards, and has
the bri commands (try 'help bri' from the CLI) available.
When intermixing net and cpe, or just using net, asterisk no longer sees
it has bri cards, and therefore doesn't have the bri commands available...

Find below the zaptel and zapata config... (Note that this is simply the
latest version, with both set to cpe. This was changed as appropriate
while testing)

TIA!

-- 
Francesco Peeters
----
GPG Key = AA69 E7C6 1D8A F148 160C  D5C4 9943 6E38 D5E3 7704
If your program doesn't recognize my signature, please visit
http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate.

---- zaptel.conf ----
# hfc-s pci a span definition
# most of the values should be bogus because we are not really zaptel
loadzone=nl
defaultzone=nl

span=1,1,3,ccs,ami
bchan=1-2
dchan=3

span=2,1,3,ccs,ami
bchan=4-5
dchan=6
---- end of zaptel.conf ----


---- zapata.conf ----
;
; Zapata telephony interface
;
; Configuration file

[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn
; p2mp TE mode
;signalling = bri_cpe_ptmp

; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net

pridialplan = dynamic
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00

echocancel=yes
echotraining = 100
echocancelwhenbridged=yes

immediate=yes
signalling = bri_cpe_ptmp
group = 1,3
context=demo
channel => 1-2

signalling = bri_cpe_ptmp
group = 2,3
context=demo
channel => 4-5
---- end of zapata.conf ----