[Asterisk-Users] Asterisk 1.2-rc1 and sip show inuse

[Kevin Hanson]

Steven Ringwald wrote:

> I apologize if this question has been asked before. Did something 
> change with the behaviour of the 'sip show inuse' command between 
> 1.0.9 and 1.2-rc1? I used to be able to see a list of extensions and 
> the number of in/out calls. Now it just reports:
>
> asterisk*CLI> sip show inuse
> * User name               In use          Limit
> * Peer name               In use          Limit
>
> no matter how many calls are being used.
>
> asterisk*CLI> sip show channels
> Peer             User/ANR    Call ID      Seq (Tx/Rx)  Form  Hold     
> Last Message
> 192.168.70.128   1234        339ad96826e  00102/00000  ulaw  No       
> Tx: ACK  192.168.70.116   1235        723e1612-52  00101/00002  ulaw  
> No       Rx: ACK  2 active SIP channels
>
> Any info about getting the previous functionality back would be 
> greatly appreciated.
> Steve
>
>
I think you have to have call-limit set in sip.conf.  I had the same 
problem, then set call-limit=10 and 'sip show inuse' worked.

Cheers,
Kevin