[Asterisk-Users] ISDN card required

[Lee Archer]

I could do without playing with multiple versions of drivers trying to
find one that works.  And I could do with not spending days trying to
make the card work with the ISDN lines.  Bascially I could do with a
card which has linux 2.6 drivers, works with Asterix and is documented.

Regards

Lee 

-----Original Message-----
From: armin at melware.de [mailto:armin at melware.de] 
Sent: 15 November 2005 09:26
To: Lee Archer
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] ISDN card required

Less hassle? Then I would recommend the Eicon Diva Server Cards.
Active cards with full support for any ISDN line protocol, Modem, Fax
and support with Asterisk via a generic channel driver (chan_capi,
tested with other cards too).
How less hassle do you need?

Armin

On Tue, 15 Nov 2005, Lee Archer wrote:
> For us it boils down to the card with the less hassle.  Anyone used 
> this sirrix quad card?
>  
> Regards
>  
> Lee
> 
> ________________________________
> 
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rob Lith
> Sent: 14 November 2005 18:24
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] ISDN card required
> 
> 
> Junghanns is a very good card, Sirrix (www.sirrix.de) also do a good 
> card with its own channel driver - saves hassels with BRIstuff needed 
> with Jungahnns. In the end its down to personal preference. Sirrix 
> comes in quad version, Junghans in quad and octo.
> 
> Regards
> Rob
> 
> 
> On 11/14/05, Klaus Darilion <klaus.mailinglists at pernau.at> wrote: 
> 
> 	Kristof Hardy wrote:
> 	> Lee Archer wrote:
> 	>
> 	>> Can anyone point me in the direction of a quality, works with
> 
> 	>> Asterisk, BRI card.  I need minimum 2 port/4 channel.
> 	>
> 	>
> 	> Ack. Like Mark pointed out, I also used Junghanns.net cards,
works 
> fine.
> 	
> 	Hi Kristof!
> 	
> 	(sorry for the empty email)
> 	
> 	Do you use it with asterisk 1.2 (CVS)? AFAIK the bristuff
package for
> 	1.2 is quiet out-of-date.
> 	
> 	btw: have you ever used chan_misdn from beronet with quadBRI
cards? 
> Any
> 	experiences? 
> 	
> 	regards
> 	klaus
> 	_______________________________________________
> 	--Bandwidth and Colocation sponsored by Easynews.com --
> 	
> 	Asterisk-Users mailing list
> 	Asterisk-Users at lists.digium.com
> 	http://lists.digium.com/mailman/listinfo/asterisk-users
> 	To UNSUBSCRIBE or update options visit:
> 	   http://lists.digium.com/mailman/listinfo/asterisk-users
> 	
> 
> 
>