[Asterisk-Users] How to let caller continue after Dial cmd

[C F]

This might help you:
${GOTO_ON_BLINDXFR}     Transfer to the specified context/extension/priority
                        after a blind transfer (use ^ characters in place of
                        | to separate context/extension/priority when setting
                        this variable from the dialplan)
Check /usr/src/asterisk/doc/README.variables

On 11/12/05, George Pajari <George.Pajari at netvoice.ca> wrote:
> We have a need to allow the caller who is in the middle of a call (i.e.
> who is already bridged between a PRI channel and a SIP channel as the
> result of entering a Dial cmd in the current context) to type something
> like "##" to cause the called party to be disconnected and to return
> from the Dial command with a distinctive STATUS so they can proceed to
> do other things within the context. Sort of a combination of the H and g
> flags to the Dial cmd.
>
> Any thoughts about whether or not this is possible in 1.0 or 1.2?
>
> If not, is there sufficient interest in such a feature for us to submit
> it once complete (I don't want to go through the effort to properly
> document, post, and maintain such a patch if its an improvement no one
> wants).
>
> --
> George Pajari, netVOICE communications    604 484 VOIP (484 8647 x102)
> Open Source VoIP/Telephony Specialists  1 877 NET VOIP (638 8647 x102)
>                   www.netvoice.ca  www.ip-centrex.ca
>       www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>