[Asterisk-Users] PRI testing using TE205 and loopback cable?

[Rich Adamson]

Answering self... this is a remote box and the guy that was suppose
to install the T1 crossover cable installed a loopback plug instead.

Sorry for the noise.

------------------------
> 
> Using fc3 with cvs-head from Nov 1st and TE205P (dual T1 port) with a
> T1 cross-over cable between span 1 and 2. (udev properly defined.)
> 
> In /etc/zaptel.conf I have:
> span=1,0,0,esf,b8zs,yellow
> bchan=1-23
> dchan=24
> span=2,0,0,esf,b8zs,yellow
> bchan=25-47
> dchan=48
> 
> And in zapata.conf I have:
> [channels]
> language=en
> context=pri-in
> signalling=pri_net
> switchtype=national
> pridialplan=unknown
> channel=>1-23
> 
> context=pri-out
> switchtype=national
> signalling=pri_cpe
> pridailplan=unknown
> group=7
> channel=>25-47
> 
> When starting asterisk with 'asterisk -cvvvddd', I see:
> 
> Nov 12 08:46:07 WARNING[6938]: chan_zap.c:8875 pri_dchannel: PRI Error: We think
>  we're the network, but they think they're the network, too.
> Nov 12 08:46:07 WARNING[6939]: chan_zap.c:8875 pri_dchannel: PRI Error: We think
>  we're the CPE, but they think they're the CPE too.
> 
> Why the warnings? (The warnings keep repeating forever)
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 

---------------End of Original Message-----------------