[Asterisk-Users] Problems with MFC/R2 in Brazil

[Steve Underwood]

Mabio Coelho wrote:

>Steve,
>
>The line is good, because we looped in my end and everything is ok.
>
>Regarding the card, it might be faulty, but I doubt it because I've tested
>with two cards.
>
>My config files might be broken, that is why I've posted my config files in
>my previous post but it got stripped by the list.  So there we go:
>  
>

>Zaptel.conf:
># Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
># Zaptel Configuration File
>#
># This file is parsed by the Zaptel Configurator, ztcfg
>#
>
># It must be in the module loading order
>
>
># Span 1: WPE1/0 "wanpipe1 card 0" HDB3/ RED 
>span=1,1,0,cas,hdb3
>span=2,2,0,cas,hdb3
>#
>cas=1-15:1101
>#dchan=16
>cas=17-31:1101
>#bchan=1-15,17-31:1101
>#
>cas=32-46:1101
>#dchan=47
>cas=48-62:1101
>
># Span 3: WCTDM/0 "Wildcard TDM400P REV I Board 1" 
>fxoks=63
>fxoks=64
>fxsks=65
>fxsks=66
>##alaw=63-66
>##fxoks=32
>##fxoks=33
>##fxsks=34
>##fxsks=35
>
># Global data
>loadzone	= br
>defaultzone	= br
>
>I think that is the only file needed right?
>
>Thanks for the quick feedback.
>
>Mabio Coelho
>
>  
>
If you are using a wanpipe card you need to get the wanpipe config files 
right too.

Steve