[Asterisk-Users] Asterisk 1.2.0-RC1 Crashing with g729 codec and ATA 1
Gervais de Montbrun
gervais at comefromaway.ca
Fri Nov 11 09:09:43 MST 2005
Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com> on November 11, 2005 at 10:10 AM -0400
wrote:
>set the keepalive to 60 or more
OK. I set this to 120
>
>that phone should not be able to display a hint status so
>speeddial = 500,500
Thanks. I've made the change
>The log could be more verbose than this.
>Set debug = 10 in your sccp.conf
>or in the console
>sccp debug 10
>
>You should see what is happening with your audio stream
I did this in the console and the output is below. It does not seem to say
much to me about audio.
Cheers,
Gervais
---------------------------------------------------------------------------------------------------------------------------
Asterisk Ready.
*CLI> sccp debug 10
-- SEP003080629796: Old session marked down
-- SEP003080629796: Killing Session 192.168.1.440|20|tr") in new stack
-- SCCP: Looking for line 140eate a channel type=SCCP, format=256,
data=140, options=
-- SCCP: Asterisk asked for the state (5) of the line 140
-- SEP003080629796: found line 140
-- SEP003080629796: New channel number: 1 on line 140
-- SEP003080629796: Global Capabilities: 268
-- SEP003080629796: format request: 4/4
-- SEP003080629796: Channel SCCP/140-00000001, capabilities: DEVICE
0x4 (ulaw) NATIVE 0x4 (ulaw) BEST 4 (ulaw)
-- SEP003080629796: Allocated asterisk channel 140-1
-- SEP003080629796: Asterisk request to call SCCP/140-00000001
-- SEP003080629796: Set callingParty Name TLS Group on channel 1
-- SEP003080629796: Set callingParty Number 500 on channel 1
-- SEP003080629796: Set calledParty Name "TLS Group" on channel 1
-- SEP003080629796: Set calledParty Number 140 on channel 1
-- SEP003080629796: getting the active channel on device
-- SEP003080629796: Indicate SCCP state (Ringing) on call 140-1
-- SEP003080629796: Send and Set the call state Ringing(4) for 140-1
-- SEP003080629796: Send callinfo for Inbound channel 1
-- SEP003080629796: Send lamp mode LampBlink(5) on line 1
-- SEP003080629796: Send ringer mode Outside(3) on device
-- SEP003080629796: Set asterisk state Ringing (5) for call 1
-- SEP003080629796: Finish to indicate state SCCP (Ringing), SKINNY
(Ringing) on call 140-1
-- Called 140
-- SCCP: Looking for line 140
-- SEP003080629796: found line 140
-- SEP003080629796: Looking for a channel with state "Ringing" (4) on
device
-- SEP003080629796: Looking for a channel with state "Ringing" (4) on
line 140
-- SEP003080629796: Found channel (1) with state "Ringing" (4) on line
140
-- SEP003080629796: Found channel (1) with state "Ringing" (4) on
device
-- SCCP: Asterisk asked for the state (6) of the line 140
-- SCCP/140-00000001 is ringing
-- SEP003080629796: >> Got message OffHookMessage
-- SEP003080629796: getting the active channel on device
-- SEP003080629796: Taken Offhook
-- SEP003080629796: Looking for a channel with state "Ringing" (4) on
device
-- SEP003080629796: Looking for a channel with state "Ringing" (4) on
line 140
-- SEP003080629796: Found channel (1) with state "Ringing" (4) on line
140
-- SEP003080629796: Found channel (1) with state "Ringing" (4) on
device
-- SEP003080629796: getting the active channel on device
-- SEP003080629796: Answer the channel 140-1
-- SEP003080629796: Set the active channel 1 on device
-- SEP003080629796: Send the active line 140
-- SEP003080629796: Indicate SCCP state (Connected) on call 140-1
-- SEP003080629796: Send ringer mode RingOff(1) on device
-- SEP003080629796: Send speaker mode 1
-- SEP003080629796: Stop tone on device
-- SEP003080629796: Send lamp mode LampOn(2) on line 1
-- SEP003080629796: Send and Set the call state Connected(5) for 140-1
-- SEP003080629796: Send callinfo for Inbound channel 1
-- SEP003080629796: readformat 4, payload 4
-- SEP003080629796: Ask the device to open a RTP port on channel 1.
Codec: G.711 u-law 64k, echocancel: ON
-- SEP003080629796: Starting RTP on channel 140-1
-- SEP003080629796: Creating rtp server connection at 192.168.1.125
-- SEP003080629796: Set asterisk state Up (6) for call 1
-- SEP003080629796: Finish to indicate state SCCP (Connected), SKINNY
(Connected) on call 140-1
-- SCCP: Looking for line 140
-- SEP003080629796: found line 140
-- SEP003080629796: Looking for a channel with state "Ringing" (4) on
device
-- SEP003080629796: Looking for a channel with state "Ringing" (4) on
line 140
-- SCCP: Asterisk asked for the state (2) of the line 140
-- SCCP/140-00000001 answered SIP/500-59ab
-- SCCP: Asterisk request to hangup Inbound channel SCCP/140-00000001
-- SEP003080629796: Close openreceivechannel on channel 1
-- SEP003080629796: Stopping RTP on channel 140-1
-- SEP003080629796: Stop media transmission on channel 1
-- SEP003080629796: Requesting CallStatisticsAndClear from Phone
-- SEP003080629796: Current channel 140-1 state Connected(5)
-- SEP003080629796: getting the active channel on device
-- SEP003080629796: Sending tone Zip (50)
-- SEP003080629796: Indicate SCCP state (OnHook) on call 140-1
-- SEP003080629796: Send speaker mode 2
-- SEP003080629796: Send and Set the call state OnHook(2) for 140-1
-- SEP003080629796: Send lamp mode LampOff(1) on line 1
-- SEP003080629796: Stop tone on device
-- SEP003080629796: Send date/time
-- SEP003080629796: Finish to indicate state SCCP (OnHook), SKINNY
(OnHook) on call 140-1
-- SEP003080629796: Deleting channel 1 from line 140
-- SEP003080629796: Deleted channel 1 from line 140
== Spawn extension (default, 140, 1) exited non-zero on 'SIP/500-59ab'
-- SCCP: Looking for line 140
-- SEP003080629796: found line 140
-- SCCP: Asterisk asked for the state (1) of the line 140
-- SEP003080629796: >> Got message OnHookMessage
-- SEP003080629796 is Onhook
-- SEP003080629796: getting the active channel on device
-- SEP003080629796: Send speaker mode 2
-- SEP003080629796: Stop tone on device
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051111/14c1dd2a/attachment.htm
More information about the asterisk-users
mailing list