[Asterisk-Users] Re: Need help can't figure out what wrong with zapata.conf

[McQuiggan, Mark xt46480]

Chuck:

Try placing your "group=1" line above the "context=incoming-rest" line.  You
seem to have to define your group first.  I think that your second "group=1"
is redundant as well.

Regards,

Mark McQuiggan


Message: 1
Date: Thu, 10 Nov 2005 11:02:19 -0700
From: Chuck Bunn <chuck.bunn at networkdoc.com>
Subject: [Asterisk-Users] Need help can't figure out what wrong with
        zapata.conf
To: Asterisk - Users <asterisk-users at lists.digium.com>
Message-ID: <43738B2B.7000606 at networkdoc.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi,

I get the following when I reload:

  -- Reloading module 'chan_zap.so' (Zapata Telephony)
  == Parsing '/etc/asterisk/zapata.conf': Found
Nov 10 10:57:34 WARNING[4475]: chan_zap.c:10816 setup_zap: Ignoring
signalling
Nov 10 10:57:34 ERROR[4475]: chan_zap.c:10249 setup_zap: Unable to
reconfigure channel '1'
Nov 10 10:57:34 WARNING[4475]: chan_zap.c:11009 reload: Reload of
chan_zap.so is unsuccessful!


My zapata.conf look like the following:

;File Name - zapata.conf
;Revision Date 11-9-05
;Version 1.3.0

[channels]
language=en
usecallerid=yes
callerid=asreceived
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
immediate=no
faxdetect=both

context=incoming-rest   ;Incoming calls to to incoming-rest in
extensions.conf
signalling=fxs_ks       ;Use FXS signalling for an FXO channel
group=1                 ;Group association for outbound trunk
channel=>1              ;PSTN attached to port 1 - Resturaunt

context=incoming-home   ;Incoming calls to incoming-home in extensions.conf
signalling=fxs_ks       ;Use FXS signalling for an FXO channel
group=1                 ;Group association for outbound trunk
channel=>2-3            ;PSTN attached to port 2,3 - Homecare

context=trunkdial       ;Uses the trunkdial context in extensions.conf
signalling=fxo_ks       ;Use FXO signalling for an FXS channel
channel=>5-8            ;Telephone attached to ports 5,6,7,8


I must be missing something any ideas.

Thanks




_
This message and any attachments are intended only for the use of the addressee and
may contain information that is privileged and confidential. If the reader of the 
message is not the intended recipient or an authorized representative of the
intended recipient, you are hereby notified that any dissemination of this
communication is strictly prohibited. If you have received this communication in
error, please notify us immediately by e-mail and delete the message and any
attachments from your system.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4683 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20051110/d296df55/attachment.bin