[Asterisk-Users] TDM400 Card

[Shaun Singh]

Is anyone using these high-density TDM2400P cards? I'm cautious about using
anything that's brand new.

Regards,
Shaun

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Jason
Becker
Sent: November 10, 2005 11:59 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TDM400 Card


Shaun Singh wrote:
> Is there some kind of limit to the number of TDM04B cards you can use in
> your Asterisk system (Red Hat 9, kernel 2.4, Asterisk
> CVS-v1-0-11-11/16/04-13:41:01))? I have 2 cards right now(rev B) with 8
> analog lines connected to 8 FXO modules. I wanted to add 2 more analog
lines
> but the third card (rev I) refuses to recognize the two new FXO modules.
> Digium have said their newer version TDM cards are backward-compatible.
> There is no problem with the PCI slot or IRQ. I'm using the motherboard
> (Asus P4P800-E) as recommended by Digium. Any ideas?

Digium's TDM2400P is better suited to your configuration. Maybe ask
Digium if they have some kind of trade in program?

Regards,

--
Jason Becker
Director & CEO
Coalescent Systems Inc.
Enabling Open Source Telephony
403.244.8089
www.coalescentsystems.ca
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users