[Asterisk-Users] Nortel BCM 3.6 and Asterisk 1.0.9 via H.323

[McQuiggan, Mark xt46480]

On voip-info.org there is a claim that asterisk and a BCM can interconnect
via H.323. There is little on the page beyond setting the H.323 connection
on the BCM to "other".  Hardware restrictions at the moment make the H.323
solution preferable to ISDN or SIP.  I am using oh323.  

Every time that I implement this, all the IP connectivity on the BCM hangs
within about 10 minutes.  The BCM is connected to another BCM via H.323 as
well (which goes down), and we have about 6 IP phones on this system.

Has anyone worked this out, really?  Can you provide me with a
configuration/instructions?

Regards,

Mark McQuiggan

_
This message and any attachments are intended only for the use of the addressee and
may contain information that is privileged and confidential. If the reader of the 
message is not the intended recipient or an authorized representative of the
intended recipient, you are hereby notified that any dissemination of this
communication is strictly prohibited. If you have received this communication in
error, please notify us immediately by e-mail and delete the message and any
attachments from your system.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 2288 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20051110/de1796cc/attachment.bin