[Asterisk-Users] Zaptel T1 Timing Source

[Don Pobanz]

Waldo Rubinstein wrote:
> span=1,1,0,esf,b8zs
> e&m=1-24
> 
> span=2,1,0,esf,b8zs
> e&m=25-48
> 
> span=3,2,0,esf,b8zs
> e&m=49-72
> 
> span=4,2,0,esf,b8zs
> e&m=73-96

You are misunderstanding the span provisioning. There is ONE clock in 
the TE410P card. This clock can either free run or get it's timing 
(sync) from one of the T1's. If the specified T1 is not available it can 
be told to look at a second t1 or third or fourth. If span 1 is the 
carrier with the timing source, try setting it up like this.

  span=1,1,0,esf,b8zs
  e&m=1-24

  span=2,2,0,esf,b8zs
  e&m=25-48

  span=3,3,0,esf,b8zs
  e&m=49-72

  span=4,4,0,esf,b8zs
  e&m=73-96

This says use the timing from span 1 if span 1 is up, span 2 if span 1 
is down, span 3 if span 1 & 2 are down, span 4 if spans 1,2,3 are down.

Don Pobanz