[Asterisk-Users] Sipura 2000

[Maximiliano J. Goldsmid]

I followed your steps to the letter but after resetting to factory defaults
unfortunately it still doesn't record the configuration changes I do.

2005/11/9, Adam Moffett <adam at plexicomm.net>:
> If you unplug the ethernet cable on a Sipura SPA and then reset the
> power it'll boot up in a diagnostic mode.  When you pick up the phone
> that's connected to it you'll get a dialtone and there are speical codes
> you can dial to do various things.
>
> Reset it to factory defaults by dialing **** followed by 73738#
> full instructions are here:
> http://www.sipura.com/Documents/faq/Section_3.html#4
>
> Once you do that the provisioning enable should be "no" and you can
> reconfigure the device however it needs to be.
>
> >Hi,
> >
> >Thanks for your response.
> >
> >I checked the setting, and indeed it was set to "yes". However, once I
> >change it to "no" and click on "apply" but after rebooting it's enabled
> >again (with all settings reverted to factory defaults, as usual).
> >
> >Maxi.
> >
> >2005/11/8, Rusty Dekema <rdekema at gmail.com>:
> >
> >
> >>It's possible that your SPA-2000 is set up to read a configuration file from
> >>a remote host every time it boots up, which would overwrite any changes you
> >>make. If you log in as admin and go to the advanced view, there is an option
> >>under the Provisioning tab called Provision Enable. Make sure that this is
> >>set to "no" and your changes should remain in place.
> >>
> >> -Rusty
> >>
> >>
> >>
> >>On 11/8/05, Maximiliano J. Goldsmid <mgoldsmid at gmail.com> wrote:
> >>
> >>
> >>>Hello,
> >>>
> >>>I have a problem with my Sipura 2000.
> >>>The problem is that it does not accept any change in the configuration.
> >>>
> >>>When I access to it, via browser or phone, and make any change, after
> >>>clicking "submit all changes" all the changes I made dissapear and teh
> >>>configuration remains with the original parameters.
> >>>
> >>>So I need to know how can I work it out.
> >>>
> >>>Thank you very much.
> >>>Maxi
> >>>
> >>>_______________________________________________
> >>>--Bandwidth and Colocation sponsored by Easynews.com --
> >>>
> >>>Asterisk-Users mailing list
> >>>Asterisk-Users at lists.digium.com
> >>>
> >>>
> >>>
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >>>To UNSUBSCRIBE or update options visit:
> >>>
> >>>
> >>>
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >>>
> >>>
> >>_______________________________________________
> >>--Bandwidth and Colocation sponsored by Easynews.com --
> >>
> >>Asterisk-Users mailing list
> >>Asterisk-Users at lists.digium.com
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>To UNSUBSCRIBE or update options visit:
> >>
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >>
> >>
> >_______________________________________________
> >--Bandwidth and Colocation sponsored by Easynews.com --
> >
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>