[Asterisk-Users] SCCP: ServiceURL and Mailbox Notification

[René Enskat [Teamware GmbH]]

I use the newest from cisco site i think 7.1 or so does it matter for the xml?

On Fri, 04 Nov 2005 11:37:41 -0600
  Greg Oliver <goliver at cistera.com> wrote:
>Forgot to mention - it is 7.0.2-0S firmware
> 
> On Fri, 2005-11-04 at 11:35 -0600, Greg Oliver wrote:
>> I had the same issue.  Here is a full config from a 4.1.3SR1 CCM for a
>> 7970 - let me knwo if you need any others and I will tftp them off.
>> 
>> Thanks,
>> 
>> Greg
>> 
>> 
>> #####################
>> 
>> greg at localhost ~ $ cat SEP00127F027D17.cnf.xml
>> <device  xsi:type="axl:XIPPhone" ctiid="581916804"
>> uuid="{0B7DCA2C-453E-4F01-908 A-A3E877A707D2}">
>> <devicePool  uuid="{1B1B9EB6-7803-11D3-BDF0-00108302EAD1}">
>> <name>Default</name>
>> <dateTimeSetting  uuid="{9EC4850A-7748-11D3-BDF0-00108302EAD1}">
>> <name>CMLocal</name>
>> <dateTemplate>M/D/Y</dateTemplate>
>> <timeZone>Central Standard/Daylight Time</timeZone>
>> </dateTimeSetting>
>> <callManagerGroup>
>> <members>
>> <member  priority="0">
>> <callManager>
>> <ports>
>> <analogAccessPort>2002</analogAccessPort>
>> <digitalAccessPort>2001</digitalAccessPort>
>> <ethernetPhonePort>2000</ethernetPhonePort>
>> <mgcpPorts>
>> <listen>2427</listen>
>> <keepAlive>2428</keepAlive>
>> </mgcpPorts>
>> </ports>
>> <processNodeName>192.168.2.10</processNodeName>
>> </callManager>
>> </member>
>> <member  priority="1">
>> <callManager>
>> <ports>
>> <analogAccessPort>2002</analogAccessPort>
>> <digitalAccessPort>2001</digitalAccessPort>
>> <ethernetPhonePort>2000</ethernetPhonePort>
>> <mgcpPorts>
>> <listen>2427</listen>
>> <keepAlive>2428</keepAlive>
>> </mgcpPorts>
>> </ports>
>> <processNodeName>192.168.2.11</processNodeName>
>> </callManager>
>> </member>
>> </members>
>> </callManagerGroup>
>> <srstInfo  uuid="{CD241E11-4A58-4D3D-9661-F06C912A18A3}">
>> <name>Disable</name>
>> <srstOption>Disable</srstOption>
>> <userModifiable>false</userModifiable>
>> <ipAddr1></ipAddr1>
>> <port1>2000</port1>
>> <ipAddr2></ipAddr2>
>> <port2>2000</port2>
>> <ipAddr3></ipAddr3>
>> <port3>2000</port3>
>> <isSecure>false</isSecure>
>> </srstInfo>
>> <mlppDomainId>-1</mlppDomainId>
>> <mlppIndicationStatus>Default</mlppIndicationStatus>
>> <preemption>Default</preemption>
>> <connectionMonitorDuration>120</connectionMonitorDuration>
>> </devicePool>
>> <loadInformation>TERM70.7-0-2-0S</loadInformation>
>> <versionStamp>{21ECCF08-13DB-4EC5-8BCE-B177569C489B}</versionStamp>
>> <userLocale>
>> <name>English_United_States</name>
>> <uid>1</uid>
>> <langCode>en</langCode>
>> <version>4.1(3)</version>
>> <winCharSet>iso-8859-1</winCharSet>
>> </userLocale>
>> <networkLocale>United_States</networkLocale>
>> <networkLocaleInfo>
>> <name>United_States</name>
>> <uid>64</uid>
>> <version>4.1(3)</version>
>> </networkLocaleInfo>
>> <deviceSecurityMode>1</deviceSecurityMode>
>> <idleTimeout>0</idleTimeout>
>> <authenticationURL>http://192.168.2.10/CCMCIP/authenticate.asp</authenticationUR 
>>L>
>> <directoryURL>http://192.168.2.10/CCMCIP/xmldirectory.asp</directoryURL>
>> <idleURL></idleURL>
>> <informationURL>http://192.168.2.10/CCMCIP/GetTelecasterHelpText.asp</informatio 
>>nURL>
>> <messagesURL></messagesURL>
>> <proxyServerURL></proxyServerURL>
>> <servicesURL>http://192.168.2.20/CiscoServices/fetchPhoneObject</servicesURL>
>> <dscpForCm2Dvce>96</dscpForCm2Dvce>
>> <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
>> <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
>> <capfAuthMode>1</capfAuthMode>
>> <capfList>
>> <capf>
>> <phonePort>3804</phonePort>
>> <processNodeName>192.168.2.10</processNodeName>
>> </capf>
>> </capfList>
>> </device>
>> 
>> 
>> #####################################################
>> 
>> On Fri, 2005-11-04 at 15:14 +0100, René Enskat [Teamware GmbH] wrote:
>> >  
>> > Hi. 
>> > 
>> > I tried to configure the ServiceURL on the asterisk inside the xml but
>> > i can't get it ro work i always get the errror hos tnot found and the
>> > ServiceURL field in the telephone is empty. 
>> > I tried to put it in den SEPxx AND XmlDedault config without success. 
>> > 
>> > This is the url: 
>> > http://phone-xml.berbee.com/menu.xml
>> >  
>> >  
>> > In my old 7960 i always get a lettersymbol at my line when i got a
>> > mailboxmessage via SIP but this won'z be with the sccp protocol? 
>> > Or how cna i have this symbols there? 
>> > 
>> > I have new voicemessages on my asterisk but the telephone is saying
>> > nothing about that.
>> > _______________________________________________
>> > --Bandwidth and Colocation sponsored by Easynews.com --
>> > 
>> > Asterisk-Users mailing list
>> > Asterisk-Users at lists.digium.com
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> > To UNSUBSCRIBE or update options visit:
>> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>> 
>> _______________________________________________
>> --Bandwidth and Colocation sponsored by Easynews.com --
>> 
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users