[Asterisk-Users] firmware update polycom 500 / dial problem

[Morel Mosolff]

On Wednesday 02 November 2005 19:29, Kevin Hanson wrote:
> Morel Mosolff wrote:
> >Hi,
> >
> >sorry - I know that problem is not directly related to asterisk but mabe
> >someone can help anyway.
> >
> >After updating our polycom ip 500 sip phones from 2.6.1. to 2.6.2.0032 it
> > is mostly not possible to dial numbers with leading zeros like 0018... If
> > you do so you see on the diplay an number like that: 1800 an the cursor
> > is on the first position.
> >But if you dial the number (press the buttons) without lifting the handset
> >everything is ok...strange
> >
> >Thank you for any help,
> >
> >morel
>
> Check out the digitmap in sip.cfg for the phone.  This is the default:
>
> dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[
>2-9]xxxT"
>
> You'll notice there is no match for 00.  You can either modify this to
> include a pattern that starts with 00 or disable this completely by
> setting:
>
> dialplan dialplan.impossibleMatchHandling="3"


perfect - I disabled this feature and all is fine (maybe I check the syntax of 
the pattern-description later).

thank you very much.

ciao,
 morel