[Asterisk-Users] Multiple Ext on IP500

Gregory Wiktor - ADCom Corp. gw at adcomcorp.com
Tue May 31 19:23:29 MST 2005


In an ip600, I just setup 6 different numbers on the phone, 1 per line.
All was fine.

Greg 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bill Ford
Sent: Monday, May 30, 2005 3:33 PM
To: asfhasterisk at qwest.net; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] Multiple Ext on IP500

I think the first thing you have to do is to set each extension to a
different port..

Line 1 Port 5060 ... Line 2 ... 5061, etc.

The way this has worked for me is this:

Line 1 is configured with 4000... Line 2 would not be configured in the
phone.. Line 2  defaults to a dup of line 1. You would then configure
Line 3 with 4013. Line one would be 5060 Line 3 5061.

Bill

On 5/30/05, Rick Baranowski <azfhasterisk at qwest.net> wrote:
> 
> Sorry if this show up twice, yesterdays post did not show up.
> 
> We are having trouble setting up two ext's on one phone. We have it 
> the point where the first two lines are ext 4000 then the third line 
> is ext 4013. We can receive calls to both ext's but we can't make out 
> going calls on ext 4013.
> The other thing that is strange is we need to have ext 4013 at the top

> of the config for ext 4000 to make outbound calls. If we swap then 
> 4013 can make calls but 4000 can't. Has anyone done this successfully?
> 
> Rick
> 
> 
> Here is our current sip config.
> [4000]
> username=4000
> type=peer
> secret=1234
> qualify=no
> port=5060
> pickupgroup=
> nat=yes
> mailbox=4000 at default
> host=dynamic
> dtmfmode=rfc2833
> disallow=
> context=from-internal
> canreinvite=no
> callgroup=
> callerid="Rick" <4000>
> allow=all
> 
> [4013]
> username=4013
> type=peer
> secret=1234
> qualify=no
> port=5060
> pickupgroup=
> nat=yes
> mailbox=4013 at default
> host=dynamic
> dtmfmode=rfc2833
> disallow=
> context=from-internal
> canreinvite=no
> callgroup=
> callerid="support" <4013>
> allow=all
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list