[Asterisk-Users] Chan OH323 and overlapping digits
Michael Manousos
manousos at inaccessnetworks.com
Tue May 31 06:12:35 MST 2005
There is nothing wrong with your config, it is just unimplemented
functionality.
Michael.
Alexander Topolanek wrote:
> Hi,
>
> Perhaps there's something wrong in my config...
>
> I did some tests connecting Asterisk to an Ericsson MD110 PBX by setting
> up an h323 trunk. When dialling into asterisk I got some problems when
> the entire number is not in the setup message, i.e. I'm dialling digit
> by digit on the ericsson phone.
>
> Lets say I have 4001 in my extensions, and dial that from the Ericsson
> PBX, then the Ericsson switch is sending a h.225 setup message with a
> called party number "4". The oh323 channel replies with a h.225
> callProceeding Message, which makes the MD110 stop sending further
> digits.
>
> I commented out already the "s" extension, so no matching pattern is
> found for a "4". I would have expected the channel to collect digits
> until a matching pattern is fount or until a timeout.
>
> Best regards
> Alexander
>
More information about the asterisk-users
mailing list