[Asterisk-Users] Ztdummy usage

[Gentian Bajraktari]

You can build it alone.
Then try to 'modprobe zaptel' and then 'modprobe ztdummy'
If you do this without errors it must work.
For more info read the wiki.

RG,
Gentian

  ----- Original Message ----- 
  From: Mohamed A. Gombolaty 
  To: asterisk-users at lists.digium.com 
  Sent: Tuesday, May 31, 2005 12:22 PM
  Subject: [Asterisk-Users] Ztdummy usage


  Dear All, 
  I have installed Asterisk everything is OK until I tried to configure meeting room, configuration was simple enough when I try I get a message that it's not a valid meeting room, Now I don't have a Zaptel device on my machine,  so I found that you will have to use ztdummy to make a dummy zaptel device on your machine and this is because of timing issues. 

  My question is ztdummy can only be done when making asterisk or is ther a way to do it after post installation? 

  I am using by the way freebsd 5.3, built Asterisk from the ports successfully. 

-- 
Thx
MAG  


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050531/8c1586f7/attachment.htm