[Asterisk-Users] Urgent Help neededt!! Asterisk 1.0.7 CPU

[Andres Maduro]

Hi,

I am quite sure it is asterisk as showed in with the top utility.  I have renamed mpg123 to see if this was causing the problem but the cpu spikes keep going to 99%....

Asterisk perform well with 1 or 2 calls (with mpg123 and without mpg123) but when more than 3-4 calls are simultaneous, the load goes to 99% and audio is bad.

I have noticed 2 asterisk processes at some time with the top utility.

Regards.

Message: 13
Date: Mon, 30 May 2005 14:54:18 -0400
From: Sebastian Silva <ssilva at gaussar.com>
Subject: Re: [Asterisk-Users] Urgent Help neededt!! Asterisk 1.0.7 CPU
       at 99%
To: Asterisk Users Mailing List - Non-Commercial Discussion
       <asterisk-users at lists.digium.com>
Message-ID: <429B615A.7070309 at gaussar.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi,

Are you sure the process consuming your CPU is Asterisk?
Did you tried with different codecs?

Andres Maduro wrote:
> Hi,
>
> I am using Asterisk 1.0.7 that comes with Asterisk at Home 1.0 ISO.  I have installed chan_unicall.c and MFCR2 support with latest Steve Underwood code unicall-0.0.2pre2 (yes this is the latest version, not 0.0.2pre19!!)
>
> Asterisk process is keeping the cpu at 99% most of the time.
>

Sebas


-- 
----------------------------------------------------------------
iCONOS / TELEMO
Cel. +58 (416) 6235291 / +58 (414) 1275884
Ofi. +58 (212) 9760777  / +58 (212) 9760677
----------------------------------------------------------------