[Asterisk-Users] RE: HiPath 4000 and Asterisk

[Ohad.Levy at infineon.com]

Hi,
Could you please post your oh323.conf file and explain which changes are
required at the HiPath? ( I have the HG3550 Card ) - however I have no
access to the HiPath system and I need to ask "someone else" to perform
that changes... therefore my ability to debug this issue is small.
 
Thanks a lot!
Ohad
 
--- Ohad.Levy at infineon.com
<http://lists.digium.com/mailman/listinfo/asterisk-users>  wrote:
> I'm trying to setup Asterisk trunk to Siemens HiPath
> 4000 V2.01
 
i suppose you mean version 2.0 ;-)
 
> What would be the best way to do so? I am a bit
> confused because as far
> as I've understand this PBX doesn't support H323,
> but I saw somewhere
> someone who created a cornet trunk and it worked
> using H323.
 
I have a HiPath4000 V1.0 interconnected to Asterisk
using a STMI board (HG3550) and oh323. The
interoperability works well. The chan_cornet AFAIK is
not released by Steffen. The interconnection between
H4kV2.0 and * is identical, use a HG3550 V2.0 for the
H4k and oh323 for *. 
 
 
 
> I've read some information about the cornet
> connectivity which is in
> development - does anyone knows the status of that?
 
AFAIK not released :-(

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050530/85a6f388/attachment.htm