[Asterisk-Users] PRI "Actual-HookState" not showing offhookoninbound

[Ronald Hartmann]

SOLVED!

	I removed the overlapdial=yes from the Zapata.conf

	Issue is resolved.

	When a call comes into the box, the PRI Channel "Actual Hook
State is set to OFF HOOK" and thus the echo cancellation routines work
as directed with the echocancel=XXX

Ron

PS> I will write up my experiences into wiki over the holiday weekend.


-----Original Message-----
From: Ronald Hartmann [mailto:RHartmann at nnamtraH.com] 
Sent: Friday, May 27, 2005 3:03 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] PRI "Actual-HookState" not showing
offhookoninbound

Stable Version 1.0.7

-----Original Message-----
From: Andrew Kohlsmith [mailto:akohlsmith-asterisk at benshaw.com] 
Sent: Friday, May 27, 2005 11:36 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] PRI "Actual-HookState" not showing offhook
oninbound

On May 27, 2005 10:57 am, Ronald Hartmann wrote:
> Actual Hookstate: Onhook

What version of Asterisk is this?  CVS HEAD from about an hour ago does
not 
show hookstate for anything but FXS interfaces, and certainly not for
PRI.

-A.