[Asterisk-Users] Re: chan_zap.c:8534 pri_dchannel: PRI Error

[JetSpeak]

If, after you've changed your config to pri_cpe and you still get the 
same messages (only saying they think they're the cpe too), ask your 
provider to see if they have any interface loops running on their 
switch.  On many devices, you can set a loop on the interface that won't 
show up as a line loop anywhere, you would just be receiving an exact 
copy of every thing you send.

Tony Mountifield wrote:

>See below:
>
>In article <20050527070219.23160.qmail at web31712.mail.mud.yahoo.com>,
>Sukardi Shahdan <shahdan_83 at yahoo.com> wrote:
>  
>
>>hello all,
>>
>>i'm using TE110P and all configuration prosess is
>>done.
>>but after i do the 'modprobe' for zaptel and wcte11xp,
>>follow by ztcfg -vv and asterisk -vvvgc i have this
>>error.
>>
>>*CLI> May 27 14:44:33 WARNING[3059]: chan_zap.c:8534
>>pri_dchannel: PRI Error: We think we're the network,
>>but they think they're the network, too.
>>May 27 14:44:34 WARNING[3059]: chan_zap.c:8534
>>pri_dchannel: PRI Error: We think we're the network,
>>but they think they're the network, too.
>>May 27 14:44:35 WARNING[3059]: chan_zap.c:8534
>>pri_dchannel: PRI Error: We think we're the network,
>>but they think they're the network, too.
>>May 27 14:44:36 WARNING[3059]: chan_zap.c:8534
>>pri_dchannel: PRI Error: We think we're the network,
>>but they think they're the network, too.
>>  == Primary D-Channel on span 1 down
>>May 27 14:44:36 WARNING[3059]: chan_zap.c:2110
>>pri_find_dchan: No D-channels available!  Using
>>Primary on channel anyway 16!
>>
>>this is my zaptel.conf:
>>
>>span=1,1,0,ccs,hdb3,crc4
>>bchan=1-15,17-31 
>>dchan=16 
>>
>>anybody know about this problem..
>>please..
>>my due date is next 2 days..
>>    
>>
>
>The problem isn't in /etc/zaptel.conf, but in /etc/asterisk/zapata.conf
>
>You probably have the line "signalling=pri_net" somewhere but should
>instead have "signalling=pri_cpe".
>
>If that doesn't fix it, post your zapata.conf (without comments):
>
>grep -v '^;' /etc/asterisk/zapata.conf
>
>Cheers
>Tony
>  
>