[Asterisk-Users] chan_misdn problem

[me me]

This is the /var/log/asterisk/full

May 27 06:51:08 VERBOSE[1107]:  [chan_misdn.so]May 27
06:51:08 VERBOSE[1107]:  [
chan_misdn.so] => (Channel driver for mISDN Support
(Bri/Pri))
May 27 06:51:08 VERBOSE[1107]:   == Parsing
'/etc/asterisk/misdn.conf': May 27 0
6:51:08 VERBOSE[1107]:   == Parsing
'/etc/asterisk/misdn.conf': Found
May 27 06:51:08 VERBOSE[1107]:   == Registered channel
type 'mISDN' (This driver
 enables the asterisk to use hardware which is
supported by the new )

I don't see any strange or wrong with that output.

I have tested two initd script, first I used one that
simple do

modprobe hfcmulti
layermask=0xf,0xf,0xf,0xf,0xf,0x0xf,f,0xf
protocol=0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x22
type=0x08

modprobe mISDN_dsp

And i get that problem, then I begin to use that one
that I find in beronet web

MODPROBE=modprobe
RMMOD=rmmod
INSMOD=insmod

case "$1" in
        start|--start)
                $MODPROBE mISDN_core
                $MODPROBE mISDN_l1 debug=0
                $MODPROBE mISDN_l2 debug=0
                $MODPROBE l3udss1 
                $MODPROBE mISDN_dsp debug=0
options=0x0

                $MODPROBE hfcmulti type=0x08
layermask=0xf,0xf,0xf,0xf,0xf,0xf,0
xf,0xf
protocol=0x22,0x22,0x22,0x22,0x22,0x22,0x22,0x22

                sleep 1
                ;;
        stop|--stop)
                $RMMOD hfcmulti
                $RMMOD mISDN_dsp
                $RMMOD l3udss1
                $RMMOD mISDN_l2
                $RMMOD mISDN_l1
                $RMMOD mISDN_core
                ;;
        restart|--restart)
                sh $0 stop
                sleep 2 # some phones will release tei
when layer 1 is down
                sh $0 start
                ;;
        help|--help)
                echo "Usage: $0
{start|stop|restart|help}"
                exit 0
                ;;
        *)
                echo "Usage: $0
{start|stop|restart|help}"
                exit 2
                ;;

esac

but I get the same output from asterisk and die
exactly the same.

The BN8S0 have its 8 ports configured in TE mode.




--- David Phelan <david at blueridge.com.au> escribió:
> Can you post the output of your asterisk log file
> and your initd script for
> starting mISDN.
> What versions of chan_misdn, ,mISDN and mISDNuser
> are you using.
> 
> Also check to see that /dev/mISDN exists.
> 
> Dave.
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On
> Behalf Of me me
> Sent: Thursday, 26 May 2005 9:18 PM
> To: Asterisk Users Mailing List
> Subject: [Asterisk-Users] chan_misdn problem
> 
> I've installed asterisk 1.0.7 with linux kernel
> 2.6.3 (patched for mISDN).
> 
> I Compile mISDNuser and loaded de modules (hfcmulti,
> mISDNdsp) for my BN8S0 beronet card.
> 
> I have installed chan_misdn-beta-0.0.3rc4 with no
> problems.
> 
> I have configured my misdn.conf as follows:
> 
> [general]
> context=default
> language=de
> debug=0
> immediate=no
> hold_allowed=yes
> 
> [octoBRI]
> ports=1,8,2,7,3,6,4,5
> context=incoming
> msns=*
> 
> when I start asterisk with asterisk -vvvvvvvvvvvc I
> get the following
> message and then asterisk dies:
> 
> [chan_misdn.so] => (Channel driver for mISDN Support
> (Bri/Pri))
>   == Parsing '/etc/asterisk/misdn.conf': Found
>   == Registered channel type 'mISDN' (This driver
> enables the asterisk to
> use hardware which is supported by the new ) cannot
> request MGR_NEWENTITY
> from mISDN: Success Ouch ... error while writing
> audio data: : Broken pipe
> Warning, flexible rate not heavily tested!
> 
> Can anyone help me??
> 
> Thanks.
> 
> 
> 		
> ______________________________________________
> Renovamos el Correo Yahoo! 
> Nuevos servicios, más seguridad
> http://correo.yahoo.es
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.322 / Virus Database: 266.11.17 -
> Release Date: 25/05/2005
>  
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.322 / Virus Database: 266.11.17 -
> Release Date: 25/05/2005
>  
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 


		
______________________________________________ 
Renovamos el Correo Yahoo! 
Nuevos servicios, más seguridad 
http://correo.yahoo.es