[Asterisk-Users] chan_capi with an AVM C4 connected to 4 BRI-linesin PTP-Mode

[Marc]

Hi Christian,

I've got the C4 up and running here with a similar configuration. And I can
tell you that it works without any problems. I also have the hylafax
answering one specific MSN for incoming fax, with asterisk answering a few
of the others. The only difference is that I only have 1 ISDN line
connected, but do have 10 MSN numbers on that line with 3 being used (1 fax,
2 voice).

You do have to specify the incoming= in capi.conf with the msn numbers, so
hylafax can handle the other number.

Regards,
Marc 

-----Oorspronkelijk bericht-----
Van: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] Namens Christian Wengel
Verzonden: donderdag 26 mei 2005 9:55
Aan: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Onderwerp: [Asterisk-Users] chan_capi with an AVM C4 connected to 4
BRI-linesin PTP-Mode

Hi!

I'm goining to connect an AVM C4 to 4 BRI-lines in PTP-Mode, all BRI-lines
will have the same number (1234-XX for example).
I don't know if this is possible and I can't test it, because I don't have
these lines yet.
Is anybody out there, running such a configuration? I'm looking for some
example configs. Especially I want to know how it is possible, to let
asterisk dynamically choose an S0 for outbound dialing. Is there a way
similiar to the way of putting some ZAP channels in one group and then use
Dial(ZAP/g1/123456789)? Further I want to use HylaFax to send and receive
faxes on a fixed number (1234-12 for example). Actually I use
incoming=* in capi.conf for PTP-Mode. How can I exclude the fixed
fax-number, so that only HylaFax answers this number?

Greets,

Christian
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users