[Asterisk-Users] Getting a Cisco gateway to work with Asterisk
niels at wxn.nl
niels at wxn.nl
Mon May 23 08:47:13 MST 2005
Try setting
defaultip=192.168.44.23
Too
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of barney
Sent: Monday, May 23, 2005 4:38 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Getting a Cisco gateway to work with
Asterisk
I tried that, but it is not working for me with Asterisk at Home v1.0 :-(
-b
> Mark,
>
> Try writing the sip.conf stanza as:
>
> [192.168.44.23]
> context=from-pstn
> host=192.168.44.23
> type=friend
> insecure=very
>
> The 'insecure=very' allows any calls from this IP address to match.
>
> Alistair Cunningham,
> Integrics Ltd,
> +44 (0)7870 699 479
> http://integrics.com/
>
>
> Mark Dutton wrote:
>> Thanks Steve
>>
>> I realised the other day that I don't want the Cisco to register with
>> credentials. There is in fact a hidden credentials command in
12.3(8)T.
>>
>> What I did was take away all registration commands from my sip-ua
>> block in the Cisco.
>>
>> I am using asterisk at home, so I have created a trunk through AMP. I
>> have changed the settings in outbound trunk to the following and
>> created an empty inbound trunk on the web page with no parameters.
>>
>> The result is that in Asterisk sip_additional.conf I have this block
>>
>> [cisco]
>> context=from-pstn
>> host=192.168.44.23
>> type=friend
>>
>> Now when I try to call into my gateway from the PSTN, I get the
>> following line immediately after the Cisco does an invite
>>
>> Sip read: INVITE sip:390 at dev.datamerge.local:5060 SIP/2.0 Via:
>> SIP/2.0/UDP 192.168.44.23:5060;branch=z9hG4bK3016D6 From:
>> <sip:894742460 at dev.datamerge.local>;tag=391004-1A5E To:
>> <sip:390 at dev.datamerge.local> Date: Sun, 22 May 2005 14:29:25 GMT
>> Call-ID: BB5B196D-CA0411D9-803BE53F-D6B5D89 at 192.168.44.23 Supported:
>> 100rel,timer Min-SE: 1800 Cisco-Guid:
>> 3143229573-3389264345-2148466707-2141291050 User-Agent:
>> Cisco-SIPGateway/IOS-12.x Allow: INVITE, OPTIONS, BYE, CANCEL, ACK,
>> PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTER CSeq:
>> 101 INVITE Max-Forwards: 15
>> Remote-Party-ID:
>> <sip:894742460 at 192.168.44.23>;party=calling;screen=yes;privacy=off
>> Timestamp: 1116772165 Contact: <sip:894742460 at 192.168.44.23:5060>
>> Expires: 180 Allow-Events: telephone-event Content-Type:
>> application/sdp
>> Content-Length: 328 v=0 o=CiscoSystemsSIP-GW-UserAgent 23 4058 IN
>> IP4
>> 192.168.44.23 s=SIP Call c=IN IP4 192.168.44.23 t=0 0 m=audio 17780
>> RTP/AVP 8 18 98 3 0 19 c=IN IP4 192.168.44.23 a=rtpmap:8 PCMA/8000
>> a=rtpmap:18 G729/8000 a=fmtp:18 annexb=yes a=rtpmap:98 GSM-EFR/8000
>> a=rtpmap:3 GSM/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:19 CN/8000 20
>> headers,
>> 14 lines
>> Using latest request as basis request Sending to 192.168.44.23 :
>> 5060 (non-NAT) Found no matching peer or user for
>> '192.168.44.23:57704'
>> Found RTP audio format 8
>> Found RTP audio format 18
>> Found RTP audio format 98
>> Found RTP audio format 3
>> Found RTP audio format 0
>> Found RTP audio format 19
>> Peer audio RTP is at port 192.168.44.23:17780 Found description
>> format PCMA Found description format G729 Found description format
>> GSM-EFR Found description format GSM Found description format PCMU
>> Found description format CN
>> Capabilities: us - 0x508 (alaw|g729|ilbc), peer - audio=0x10e
>> (gsm|ulaw|alaw|g729)/video=0x0 (nothing), combined - 0x108
>> (alaw|g729) Non-codec capabilities: us - 0x1 (g723), peer - 0x2
>> (gsm), combined - 0x0
>> (nothing)
>> Looking for 390 in from-sip-external
>> list_route: hop: <sip:894742460 at 192.168.44.23:5060>
>>
>> You can see the line Found no matching peer or user for
>> '192.168.44.23:57704'
>>
>> OK, now if I go into the parameters for my trunk and add the line
>>
>> Port=57704
>>
>> It works!!!
>>
>> Problem is, the port changes. The question then is, where in my Cisco
>> config can I specify the listening (or return) port to 5060 so it
>> does not pick an arbitrary port from the pool?
>>
>> Regards
>>
>> Mark
>>
>>
>>
>> Date: Sun, 22 May 2005 11:10:31 -0400
>> From: Steve Blair <blairs at isc.upenn.edu>
>> Subject: Re: [Asterisk-Users] Getting a Cisco gateway to work with
>> Asterisk
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> <asterisk-users at lists.digium.com>
>> Message-ID: <4290A0E7.9010505 at isc.upenn.edu>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>>
>> When you say identify I presume you are trying to get the Cisco to
>> register as a user. To the best of my knowledge it cannot do this.
>> Instead
>> define a peer in sip.conf which is the gateway and place traffic
>> matching this peer into a context that is defined in your
extensions.conf file.
>> The
>> Cisco will need dial-peer statements to match inbound dialed digits
>> and forward all matching calls to your Asterisk box.
>>
>>
>>
>> Mark Dutton wrote:
>>
>>
>>>Can anyone please help me with sample IOS commands to get a Cisco
>>>gateway working properly with Asterisk.
>>> I cannot get my Cisco 2801 with BRI interfaces to call into
Asterisk.
>>> The Cisco identifies itself as sip:. at datamerge.local.
>>> I cannot figure out how to get it to identify as
>>>sip:cisco at datamerge.local. The gateway works with other SIP servers
>>>that don't require authentication, but Asterisk wants it to
>>>authenticate, or at least idenitify itself and I cannot work this
bit out.
>>> If I put in the host address in my sip.conf, I still get a "cannot
>>>find host 192.168.44.23:<random port number>, where <random port
>>>number> is actually some random port number.
>>> I am at my wits end.
>>> Regards
>>> Mark
>>>
>>>---------------------------------------------------------------------
>>>--
>>>-
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list