[Asterisk-Users] Getting a Cisco gateway to work with Asterisk

[barney]

I have that same problem just now. I`m trying to find some solution with serveral tests, using IOS v.12.3(8r)T7 on the C2821 box with two PRI ports.

When i find something, it`ll be posted here, and i`m awaiting to do it also from your side.

-b

  ----- Original Message ----- 
  From: Mark Dutton 
  To: asterisk-users at lists.digium.com 
  Sent: Sunday, May 22, 2005 2:55 PM
  Subject: [Asterisk-Users] Getting a Cisco gateway to work with Asterisk


  Can anyone please help me with sample IOS commands to get a Cisco gateway working properly with Asterisk.

  I cannot get my Cisco 2801 with BRI interfaces to call into Asterisk. 

  The Cisco identifies itself as sip:. at datamerge.local. 

  I cannot figure out how to get it to identify as sip:cisco at datamerge.local. The gateway works with other SIP servers that don't require authentication, but Asterisk wants it to authenticate, or at least idenitify itself and I cannot work this bit out.

  If I put in the host address in my sip.conf, I still get a "cannot find host 192.168.44.23:<random port number>, where <random port number> is actually some random port number.

  I am at my wits end.

  Regards

  Mark


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050523/7971dc84/attachment.htm